Remix for "Jet Engine Desk Fan V3" by pittance

This is just a modification for the switchbox, which is housing all the electronics like the Arduino, the ESC an wiring.

The modification to the box consists of spaces for M3 nuts that are usually used with standard M3 screws, thus enabling a longer lasting threaded connection. between the lid and the box.

The lid was modified to take standard mechanical keys and the distance between each key was increased to facilitate the use of standard key caps. The holes for the srews were widened to 3,2mm and the recess for the screw heads were widened to 6,2mm so that the screws don´t bite into the plastic, giving a longer life span to the plastic lid.