About
- Just a base for your 100x100mm PMMA/LED signs
- Uhhm, I know, the wiring I did is pretty ugly. :-D
- For some reason TV won't accept my original SVG, so I uploaded a DXF
Additional things needed
- USB cord
- 5 blue LEDs
- 33 ohms resistor
- 100x100mm PMMA sheet
About engraving
- I did this with my Indymill: 0.1mm V-shaped 30° engraving bit, 300mm/min, 0.1mm attack, 0.19mm deep
License:
Creative Commons - Attribution - Share Alike
frogfish_42
