Day of the Dead Halloween Pumpkin - Lamp

Check out all our latest exclusive designs on our Patreon: https://www.patreon.com/SEREV3d

• For getting the rights to sell the 3d prints of our designs, become a paid member on our patreon: https://www.patreon.com/SEREV3d

▶ ▶Join our Serev3D Authorized Sellers List

What filament to use for the Day of the Dead Halloween Pumpkin? We recommend:
Polymaker PLA Matte White (or choose beige)

Painting recommendation if you use the white filament:
Base Coat: Sand the print (optional), then apply a light brown or tan base coat.
Shading: Use darker browns and blacks (rub n buff or light brown acrylic paint) for dry-brushing, focusing on recesses for depth.
Highlights: Lightly dry-brush the raised areas with white or beige acrylic for contrast.
Sealing: Finish with a matte clear coat.

Painting recommendation if you use the beige filament:
Dabbing Technique: Apply a white or light tan coat using a sponge, leaving the brown filament visible in the recesses.

Shading/highlights and Sealing: Same instructions as above with the white filament.

PRINT info and advice:
If you use the print profile we provided the manual tree supports are already set up and added on the file as well as all the recommended settings, with Bambu Slicer it's all fully ready to print!
The easiest way to remove supports from the mouth gap: we recommend to use a thin pliers, blade/knife to cut out/remove the supports.

If you download the stl version, don't forget to add a few manual or automatic supports on top of the eye holes, nose, and the mouth gap

What kind of lights to use for the lantern?

Flameless LED Tea Lights Candles
▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️

Check out our Patreon exclusive designs too, we have a lot more awesome things to print:

🔹 Join SEREV3D on Patreon & unlock everything!