(Limbus Company) Vergilius Blade

Hello everyone it's been a hot minute, but I come with a gift! Vergilius' Sword! Technically this is a spoiler for Canto 6 and Leviathan (RIP) but only if you know already.

As of right now, I have a rather large queue of items I want to make, starting with
-Limbus company sinner coins (basically the coins from the game but with the sinners' symbols on them)
-Queen of Hatred's staff from Lobotomy Corp and Library of Ruina
-Twilight from Lobotomy Corp
-Solemn Lament (specifically the one shown in ruina because its more detailed)
-Don's lance (I am trying to make it a locking telescopic lance but that isn't proving easy to make)
-Ruina/Lobotomy Corp coins
-Da Capo from Lobotomy Corp.

I have been working on the coins but they have been a drain to try and make so I decided to make this as something quick and easy. I have taken the liberty of splitting this into multiple parts to make it easier to print. I have also made two separate versions due to it being very difficult to discern whether there is a guard on Verg's sword or not (V2 is the one with a guard). Use whichever you prefer or both!

FOR PERSONAL NONCOMMERCIAL USE

https://cults3d.com/@MrHShroud
https://x.com/Mr_H_Shroud
https://ko-fi.com/mrshroud

Be sure to leave a comment on what I should make next from Limbus Company! Follow my Twitter for updates and donate to my Kofi if you enjoy my work!

Suggested Print Settings (but feel free to print at whatever settings you want):
Resolution: .2
.2 infill
60 mm/s
If you happen to have red/orange translucent filament I would recommend using it for the blade part

ASSEMBLY:
The sword requires 3 10mm wooden dowels as internal supports. If you feel so inclined, you can print them, but I wouldn't recommend it. Each dowel needs to be 40mm in height.
Glue the dowels into the holes on the handle and middle body
Then glue the parts together, I recommend superglue for PLA.