Keiko bjd kigurumi mask

KeiKo 圭子 -- "Blessed Child"

• Designed by Labo M. K.
• @Karly_Lilia (咔帕噗狸狸亚) @mxink0016 (弦子想摸鱼)

---

List of STL files:

• KeiKo-front.stl
  • Front piece of the mask
• KeiKo-back.stl
  • Back piece of the mask

Assembly instructions:

• A pair of 3108 locks
  • 2*4 = 8 M3 bolts & nuts to install the 3018 locks onto the mask
  • Recommended bolt length = 10mm ~ 14mm
  • Installation holes have been designed in advance, no need to drill
• Top hinge
  • one M4 stud bolt (length >= 14cm) & two M4 nut
  • Flat washer is recommended

NO ILLEGAL USE !!!
Commercial use is not allowed in principle, unless the model is used to make a complete bjd mask with makeup and eyes.

Recommended head circumference <= 60cm
As a reference, my (@Karly_Lilia) body size:

• Head circumference = 58cm
• Shoulder width = 43cm

---

部件清单：

• KeiKo-front.stl
  • 前脸
• KeiKo-back.stl
  • 后壳

组装指南：

• 一对3018中箱扣
  • 8个M3螺栓和螺母，用于安装3018锁扣
  • 推荐螺栓长度：10mm至14mm
  • 安装孔已预留
• 顶部铰链
  • M4双头螺栓一根（长度至少为14cm）和M4螺母两个
  • 推荐在铰链两端使用垫片

禁止违法犯罪用途！！！
原则上不允许商业使用，除非利用该模型制作完整的带妆带眼片的bjd头壳。

推荐佩戴头围小于等于60厘米
作为参考，我（咔帕噗狸狸亚）的身材数据：

• 头围：58cm
• 肩宽：43cm

---

Labo M.K.