Carn the articulated mask

Thanks to DwarfDecker for the pivot design

I made a mask with confort and easy assembly in mind that still looks interesting.

i noticed you can adjust the mask with a heat gun (or hair dryer) if the side are too tight: heat the part for a few minutes then bend the part carefully

Recommanded settings

• The pivot is 100% infill and made with TPU as the piece should be flexible!
• the mask (both part) at 0% infill (need to be light weight) and the wall line count should be at least 3 for sturdiness

Default measurements

• seized for a head 21 cm high and 15.5cm wide (above eyes)