Big Towel Bar

As in most bathrooms, my towel bar was way too short for all the stuff to hang and to dry.
Could not find any hanger fullfilling my wishes, biggest hangers available in stores were only 80 cm long.

My solution:
I bought an aluminium bar from Amazon, 180 cm long (!), 3 cm diameter, 3 mm wall strength (2 mm would do, too). Less than 30 bucks, incl. shipping.
Now I had to design a very strong mount for the bar, easy to mount, and last but not least, had to look like a designer piece.

Print instructions: use 6 walls, 25% infill. Use PETG or PLA+.
Important: left and right side are different. You have to mirror each part in your slicer software.

If you want to tweak the design, use the Fusion360 files, should be an easy job.