Watering can adapter

We have ordered a watering can Watering can (https://amzn.to/4e36M13), however the sprinkler head (https://amzn.to/4e5PQH0) did not fit. That is why I have designed a simple adapter with an inner diameter of 24.5mm on the one side and outer diameter of 27mm on the other side. Now it is a snug fit!

It is recommended that you print with 100% infill. I have used PETG for a little flex but you can also use PLA and ASA filaments:

PLA:
SUNLU PLA Plus (https://amzn.to/3VDsHEC)
Amazon Basics (https://amzn.to/4cwhzAj)
GEEETECH Filament PLA (https://amzn.to/4bddAry)
ELEGOO PLA+ (https://amzn.to/3xF8M06)
eSUN PLA+ (https://amzn.to/4cyj80E)

PETG:
eSUN PETG Filament (https://amzn.to/3VNOzi0)
OVERTURE PETG Filament (https://amzn.to/3RxeFU0)
ERYONE PETG Filament (https://amzn.to/4cqbpBJ)
SUNLU PETG Filament (https://amzn.to/4clf0BL)
Polymaker PolyLite PETG (https://amzn.to/3xr0dWP)
FormFutura - ReForm - rPET (https://amzn.to/4eubLcr)
extrudr® XPETG (https://amzn.to/4epaDqt)

ASA:
extrudr® DuraPro ASA (https://amzn.to/4ewASvj)
Polymaker PolyLite ASA (https://amzn.to/4cnAe1k)
AzureFilm 3D Black (https://amzn.to/3VSuTJO)

Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee (https://buymeacoffee.com/3dlukas).