#Universal cupholder for pinball machines
##Features:
- Symmetrical design fits left and right pinball leg without change
- Only one leg screw needs to be loosened for safe (un)installation
- Can be attached to upper or lower leg screw for appropriate height
- Can be secured by cable tie for extra stability
- For bottles and cans, not for mugs, bongs, cigarettes or live animals
- Inconspicuous Bavarian Pinball Heaven logo for talisman effect
- Also usable and acceptable for players of nearby arcade games
- Addon optional hook for insertion in upper slit, e.g. for pinball keys
- Addon adapter to fit small (9/16") screw heads in the big 5/8" hole
##Notes:
- Meanwhile, I consider the STL files as final, will only add documentation or fix bugs.
- Needs two M10 or 3/8" flat washers with 1mm thickness and 25mm or 1" diameter to avoid crunching on both sides of the mounting flap (preferably steel, or use 3D-printed replacement), cf. example from amazon.de, example from amazon.com -- unfortunately has 1.5mm thickness :-(. 20mm outer diameter will also do the job, but more than 1mm will only work with extra long leg screws.
- Thx to BartmanAbyss for hints and printing of maaany holders,
and to mBuilds for further tips.
- Thx to RobertM for the artistic idea of a winged haloed pinball logo.
- Contact me for OpenSCAD file and permission if you wish to create derivates or sell prints.
##Changes (too many, sorry):
- Improved hole for lower screwhead and increased circle segments from 90 to 180 in v26.
- For small screws, there is an adapter sleeve and an extra hole since v23 to store it when unused.
- Discarded v23 that required large screws to be aligned and v21/22, which did not print well and still wobbles on many legs.
- Increased size minimally (v14: 25.2, v15: 25.5, v20: 25.8) to also allow for 1 inch washers.
- Added hook (will fit also older versions) and washer.
VMzB
