Antenna Mirror mount adapter - V1

#Changes have been made. Please see the build list below.
The change was made due to the natural gap, one of the identical plates will eventually buckle.

This is a set of mount insulators for the JBC995 Mirror adapter and a HOBBY Brand tripod with an approximate 22-23mm neck.
build list: They should be correctly oriented and not require any supports.
Print one of part number 1.
Print two of part number 2.

You can use the original bolts, nuts and split washers that came with the mirror mount unit. you will not need the stainless back plate came with it. Space for the original 11mm or 7/16 nuts, has been added. You would need only one wrench to tighten them down. I placed the split washers between the bolt head and the eyelet. This provided extra spacing for the open-end wrench .

I have started using guy ropes with my radials for added stability. That is what the black line and yellow eyelets are for.

I use this with the POTA PERformer antenna designed by Greg Mihran - KJ6ER and made popular by Michael KB9VBR.
Video Link:
https://youtu.be/wqw3ultuPQg?si=tNexx4vLVQ-wDsEj

This is used to isolate the ground of the antenna from the body of my camera tripod.