Chromakopia Tyler The Creator Cover Art (3 Colors)

2D art of Tyler the Creators Chromakopia

Uses 3 colors

Use the hfp file if you want to edit in Hueforge (add more colors or make slight changes)

Project: CHROMAKOPIA HueForge.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 210x210mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #14 (1.2mm) swap to White for the rest.