1 Axis Camera Tilt Mount

This is based on the 1-Wege-Stativneiger, 1 Way Tilt Head by TASPP. I wanted to use it with my camera slider, but needed it to be a little more rigid since the camera was moving.

I also changed it to work with m8 bolts for the tightening knob, and 3/8" for the tripod and camera connections.

Requires 2 m8 x 45 bolts, 2 m8 nuts, 1 3/8" nut, and one tripod camera screw on top (I used 3/8" but either should work). Some of them are tight fits, but lets say that was intentional.

https://www.youtube.com/shorts/U58zBr3gnLY