Lovesac Cupholder 1/8 spliced w/ Dowel supports

Hi, I loved the file but it couldn't fit on my print bed! To fix this, I cut it into 8ths and added negatives where a 3/16 dowel rod could fit. When printing, you'll have to print each piece twice with the second one being mirrored to get the whole cup holder. Thanks for reading!

Dowel Rod:

The rod that I am using is the 3/16 (0.1875) inch x 36 inch green tipped one from Walmart. It is $0.98 and here is the link to it on Walmart's website. /
(https://www.walmart.com/ip/Hello-Hobby-Wood-Dowel-36-Long-3-16-inch-Diameter-Green-Ends/701329034?classType=REGULAR&athbdg=L1600&from=/search)

You'll need to cut the dowel rod into 10 pieces; 6 5in pieces and 4 1.5in pieces. The 5in pieces go into the holes that will hug the arm of the couch. The 1.5 inch pieces will go to the holes of your mirrored pieces.

If you have any questions, feel free to ask!