November 16, 2024
Description
This was created to solve the problem of driver controller wires laying on the floor and getting damaged by being stepped on.
Everything needed can be sourced from old field elements. The bottom is a standard base plate, then cones from Over Under or Tower Takeover, and 1/2" PVC pipe that can be sourced from previous elements or hardware store.
The wire holder can be printed without supports if printed wide side down. The version in the images has "KRL" embossed, but the stl file has a blank face.
The stopped isn't necessary, but helps keep the controller cable connector more accessible.
License:
Creative Commons - Attribution - Share Alike
D_Wittman
