Benro Tripod Macro Boom Adapter

This kit allows you to convert your Benro Tripod with a 20mm mast to a Macro Boom Tripod. In the field you can go from the standard Benro Tripod to the Macro boom and back in seconds with no tools! You will need to order a ball head adapter with a 3/8 mounting hole and a 3/8" hex head bolt in addition to printing one of each of the parts described below.

There are two different options that go into the place of the mast in the tripod. You will only need to print one of them. The Regular one is long and allows you to install the adapter up through the bottom of the tripod for on the ground shots. The stubby is just that, stubby. You will need a 3/8" by 1.75" (measured from under the head to the end of the threads) Hex head bolt. This will go in the bottom of the part just described to attach the ball head to.

If you want to use the stock Benro ballhead on the tripod adapter print the Arca to Mast with Guides so it has a more secure fit. If you want to use the new ball head on the tripod adapter then print the Arca to Mast with Flat bottom.

Enjoy!