Classical Bird Feed House
Required Printed Parts:
- Back.stl (1x)
- Floor.stl (1x)
- Front.stl (1x)
- MainPillar.stl (1x)
- RoofLeft.stl (1x)
- RoofRight.stl (1x)
- Side.stl (2x)
- SidePillarLeft.stl (1x)
- SidePillarRight.stl (1x)
Optional Printed Parts:
- AlignmentPinASymmetrical.stl (4x)
- AlignmentPinSymmetrical.stl (3x)
- Bumper (2x) (Ninjaflex 20% infill)
Required non-printed parts:
- cone head screw M3*10 (12x)
- hex head screw M3*20 (6x)
- brass insert nut M3 L4 OD5 (18x)
Recommended Materials:
ABS or PETG (10% infill)
Remark:
- I used metal alignment pins and super glue to attach the roof to the pillars
projunk
