Volador VX3.5 Walksnail Moonlight Camera Adapter (FlyFishRC cage adapter)

Propably compatible with most of the FlyFishRC frames using this camera cage, but not tested!

/i\ Important Note: Install the camera cage the other way round! (see picture) /i\

Printer Settings:

• TPU
• 0.2 mm layer height
• 0.4 mm nozzle
• 100% infill

This adapter is necessary to use the Walksnail Moonlight camera with the FlyFish Volador VX3.5/3. It supports a camera tilt up to 35° without ND filter, 30° with ND filter.

Assembly instructions:

1. Put the adapter left and right on the camera. Use M2x2mm screws
2. Pressfit the camera cage on the adapter with camera installed. (Important note: For the adapter left and right cage are swapped, to get more space inside the frame!)
3. Install complete cage with camera in the frame. You may need to unscraw a little the top screws.