Tablet Holder, Wall Mount (Fire HD 10 Plus 2021)

This is an update on one of my old designs.
These wall mountable brackets were specifically designed to fit the Fire HD 10 Plus (2021) Amazon tablet so you can have a TV/Entertainment/Gaming setup posted up anywhere you'd like.
I have mine attached to the bathroom wall within easy reach of the toilet for some entertainment while I'm.. sitting there. BUT, you can wall mount your tablet anywhere you decide it's needed.

To attach these brackets to your wall, simply apply a large Command adhesive strip to the back of each of the two brackets, slot your tablet into the left and right hand brackets to get the spacing right, then press it up to the wall wherever you'd like to mount your device. Use a level to make sure your tablet is straight before firmly pressing down on the brackets to set the adhesive in.
Your tablet or phone will slide up and out of the brackets for cleaning/charging.

To make printing easier, the left and right hand brackets are already laid out together in a single STL file. No supports or adhesion options should be necessary.
The estimated print time for a sonic pad on the fast PLA preset is 1 hour.

Made for the Fire HD 10 Plus tablet, 2021 release
See https://www.thingiverse.com/thing:6414115 for another version of the brackets that were designed for the Fire HD 10, 2019 release