.22 LR Ammunition Case

Design Updates:

Added new "case insert" file with .25 Hex holes, doing away with the round holes, this has resulted in much higher printability. I recommend this file over the round hole version (12/21/24)
Added new .22 case option that doesn't have built in supports to allow more printing flexibility. (12/17/24)
Added new "Case insert" file with hole sizes increased from 0.24 to 0.25 for those who are having fit/tolerance issues. (12/1/24)

Design Details:

Capacity: Holds up to 200 rounds of .22 LR

Modular design: Allows changing out the insert to fit other types of .22 ammunition without reprinting the entire case.

Support-Free Printing: The model is designed to print without additional supports. Any required support is already built into the CAD file.

Magnetic Lid Retention: The lid is designed to be held in place with four 2x8mm magnets that are added post-print.

Round Projection: The lid can be removed and inserted into the base, which lifts the rounds for easier access. (https://imgur.com/a/F42wNV5)

My Print Settings:

Nozzle Size: 0.4 mm
Layer Height: 0.16 mm
Material: Matte PLA

If you feel the design and print are the best thing since sliced bread, a “buymeacoffee” donation would be an appreciated gesture but not expected. I also accept hardy pats on the back, fist bumps, comments like “this is totally rad” and all other forms of positive affirmation. You can contribute via the link here if you’re so inclined. https://buymeacoffee.com/overton_prints