December 4, 2024
Description
This was designed for a vertical rotary laser engraver which was a slight re-mix of this https://www.thingiverse.com/thing:5296551 I designed it to be cut from 6mm HDPE. It used M3 hardware. It isn't hard to figure out what was used. A .step file is included. Originally it was mounted on a 3D printed base, but I changed the dxf files to be used with a machined (so higher precision/better quality 5mm Rigid Flange Coupling). https://www.aliexpress.us/item/3256806064936592.html?spm=a2g0o.order_list.order_list_main.118.7e611802jjK7uj&gatewayAdapt=glo2usa
Th O-ring radius shows what the diameter of the O ring should be on the grippers. The inner diameter should of course be slightly smaller so it fits tight. I had a random pack I used so I do not know their actual diameter. I just changed the model until the fit.
The top plate has four holes that are lined up with the bottom plate screw holes that fasten it to the flange.
License:
Creative Commons - Attribution - Non-Commercial
cgmllr100
