December 5, 2024
Description
Couldn't find an organizer, so I made one.
Biggest parts so far require a 25cm square print bed.
The following are designed to print in extra draft mode (0.20mm first layer, 0.28mm subsequent layers, 5% infill):
Print everything ONCE, except SH_Cup_50, which needs five copies (they're for the three tech type draws, missions, and the buy/sell markers)
All others should be printed at 0.20mm layer height.
Most of the trays have support for separately colored text.
If you do NOT have multi-filament support, just print the _0 versions of files and you'll get recessed text. You can use crayon or some other sort of filler to highlight the text if you'd like. If you DO have multi-filament support, merge the _0 and _1 versions and change the filament color on the second part appropriately. I tried to match the coloring on the counter banners as best I could with the filament colors I had on hand.
(In Bambu Studio, select Import, select both the _0 and _1 matching models, and say "Yes" when it asks if you want to combine them. Then switch from Global to Object (in the Process pane on the left), expand the object, select the _1 object, then right-click and pick Change Filament and pick your text color. You can adjust the final color assignments in the final print dialog)
BOTTOM LAYER
These are designed to connect together but can be separated easily for gameplay
The tech board goes on top of everything above. Put the NON-folded edge at the bottom of the box.
Next goes SH_DiceTray (it's more of a spacer, you don't really need to print it if you don't want to)
These go along the side and have a raised lip to hold the tech board in place.
SH_StructureA
SH_StructureB
The moons and large square tile go vertically in the corner.
SECOND LAYER
Split the seven faction boards and policy board into two piles of four and place them in the box and push them upward so they cover the structure trays.
Take the rules and the seven section three references and place them spine edge (folded edge) down so that the folds fill the gap left by the player boards. Do the same thing with the seven card-stock player aids.
Put the cardboard year / initiative tracker on top.
SH_SmallHexTray fills the gap to the right of the stacked pile of documents.
THIRD LAYER
Place six of the faction boards on top of the tracker board.
Above that, place five copies of SH_Cup_50; three of these should be in the colors of the three techs. The other two are for missions and the buy/sell counters.
SH_WorldCardTray goes to the right of the cups, up against moons, above the hex tray.
SH_StackedTrays, SH_DiceTray2, and the seventh faction go in the remaining space. Orient the faction so that the large hex doesn't hit it.
The second dice tray can also be used to hold all the Non Player Faction bases during the game if you're playing with fewer than seven players.
TOP LAYER
The two medium-sized and two large-sized hexes go on the very top and should fill the remaining space.
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
ethern0t
