Anycubic Mono 6Ks Built Plate Drip Bracket (angled) with Bottle holder

Designed this Built Plate Drip Bracket that will hold the Build Plate at a slight angle, and that can be left on during the building process. The corner that would touch the resin in the basin during printing on other models is cut off, so it will not (should not!) touch the resin if the basin is filled to max.
The side that holds the Built plate is hollowed out but suported with beams, so it will use a bit less resin to print.

In addition, it has a bottle holder. so you can let almost emptybottles drip into the basin during the printing process. MOST Resin bottles should fit there, but I know there are some unconventional ones that might not.
Don't let the photos decieve you - i realized the mistake of missing a cutout for the plate after I had already printed mine and manually saw a corner out in my model seen on the photos. The corner has been removed in the model afterwards as well. It might look slightly different, but should work. Please let me know if it doesn't so I can revise this.