Mickey Mouse Bag / Hat / Loungefly Wall Hanger

Description

This is a wall hanger in the shape of Mickey Mouse that can hold things like Loungefly bags and hats. There are two versions, one is designed to be mounted with a screw and the other is designed to be mounted with Command Strips¹.

Print Notes

• I recommend using PLA, this black¹, this red¹, and this white¹ make for a traditional looking Mickey.
• If you want the pants and buttons to be a different color, you can add a color change in your slicer. If you print on .2mm layer height, the pants will start at layer 141 and the buttons will start at layer 144.
• No support material.
• .15-.20 Layer height.
• 10% infill is sufficient.
• If you are worried about strength, increasing parameters to 3 may help.

Mounting

1. MickeyHanger-FlatMount just has a flat side on the back, simply stick it to the wall using a 3M command strip¹ or something similar.
2. MickeyHanger-WallMount is a two piece design that has a small piece (MickeyHanger-WallMount-mount) that screws into the wall, and then the main piece slides over that wall mount piece. (see images)

1) This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!