Flexi Snake

This is a 'simple', articulated snake with a smooth body (no scales) in 2 lenghts
Version 1.1 - 03 V 2025

Original is with a head and 43 body segments - 239mm long
Short and keyring versions are with 14 segments - 92mm long

It's based on my previous Flexi Capy Snek and Flexi ReinD Snek
Connectors are in version 1.3 in here - I will update older models too. Segments are now allowed to only rotate in place without moving so much to sides like in previous versions

Original model is printed straight but if you want to print it as big as you can there is an Arc version (the same model but bended - wich uses more square space with more optimal way)
On typical printers (~235mm bed plate and more) you should be able to go around 300% (so 27x more volume than original)

---

If you want to sell prints of this models you can buy a commercial license
https://cults3d.com/en/3d-model/game/flexi-snake-commercial-license-c47

I also made a LONG Flexi Snake (1 meter, 3.3ft)
Size comparison is on the last photo
https://cults3d.com/en/3d-model/game/long-flexi-snake

More Flexi models:
Capy Snek
https://www.thingiverse.com/thing:6799681
ReinD Snek
https://www.thingiverse.com/thing:6860291
Reindeer Doodle
https://www.thingiverse.com/thing:6844455

---

UPDATE 03 V 2025
Changed a head a little (longer mouth, more visible eyes, different nose and top side) - see photo
Improved model bending in XY axis (around 5-7% highier bending angle)

---