DJI O4 to DJI O3 Adaptor

I design a mount that can trans DJI O4 air unit in to DJI O3's mount
Because O4 can't install into old frame that design for O3
I didn't get the O4 so if the model have any problem pls make a comment below or contact me at [email protected]
Print in PLA it didn't need TPU
The model need some M2 screw and M2 nut
For O4 cam you need to use 4× M2×4 screw
For O3 mount you may need to check your frame, each frame may use different length of screws.
我制作了这个模型，它能把O4的安装孔位转换成O3的安装孔位以适配老的为O3设计的机架
在制作这个模型时我并没有拿到O4天空端，所以如果模型有任何问题请在评论区说出，或者通过邮件联系我 [email protected]
此模型使用PLA打印，它不需要TPU
你需要准备一些M2螺丝以及M2螺母
安装O4镜头你需要用到4个M2*4的螺丝
O3的安装孔位请查看您的机架打印件的厚度，每个机架使用的螺丝长度可能有区别