1/4", 3/8", 1/2" Socket Storage / Organizaton by TeamOliva remix

1/4", 3/8", 1/2" Socket Storage / Organizaton by TeamOliva on Thingiverse: https://www.thingiverse.com/thing:5136153

I have remixed these none of the parts are the same anymore,they are completely remixed.

because the rails was not long enough to accommodate a entire set of metric or standard sockets,I have lengthened the rail to 239mm print at 45 deg to print on a 200mmx200mm build plate.

all the holders was to high and to loose,I have added balls to the holders and shortened them to the proper heights of wrench heads so that they all fit flush to the rail holders and now all sockets now snap into place so they no longer fall off if turned upside down.except for 1/2 in deep sockets there is a lot of weight on these sockets so it is advisable not to turn them upside down I think standard 1/2 inch sockets may work just fine.

I have tested all holders and everything seems ok,all my socket sets come with a organizer case so all I needed was the 1/4 inch holder.