1.5 to 1 din Radio bezel Jeep TJ

This was a really annoying project for me it basically takes a 3rd party magsafe charging puck and allows it to connect to the radio 1.5 to 1 din converter and the arm is detachable for ease of use for taking apart the dash

link to the magsafe charger:
https://www.amazon.com/Dashboard-Windshield-Auto-Alignment-%EF%BC%88Aluminum-Dissipation%EF%BC%89/dp/B0B3XBPXKB/ref=sr_1_19?dib=eyJ2IjoiMSJ9.nh5-HLvNgXF9gAm9devEEC5s3G8hz9Np5gwx2eOjtu_p8-WysRwLHkfSXhITSCh0CilcjnzQB5eIZzt06Ehq_zmTsZ74H_8zu-FJ_SRvPJZYfBkI8my-pV_mNodRNWpJY61TTZsTF767eKsjC8nPlM4OPiU6HLkS34HgqkzRQyAe9M2Ht9BMv8kBBcSTw7AniyV1ydXdDSqz6pKo9L2ApHPtrmM_vy8W9-Da-Po9nGE.ltCv9W7Hw9AlUPSYVcfT8Q9H8Dg3TKD0O1aZTaeA6B8&dib_tag=se&keywords=magsafe%2Bcar%2Bcharger&mfadid=adm&qid=1740362887&sr=8-19&xpid=j4C9tqCDmRiHH&th=1

i did break the vent clip and used the ball + thread and threaded into arm

Has hole in bottom right to allow most charge cables

should work on any jeep tj from 97-02 at least 03-06 did use a radio factory radio which will probably interfere with the mounting (unless bought the sqaure headunit hole plastic piece)

support need on Bezel not Arm
80% infill is overkill
ABS should work too