Spark Plug Rack

I was tired of all our spark plugs sitting on shelves and always falling over and getting damaged. So i made this simple rack.

• Print w/ 20% infil. Most of it will be solid.
• Sides print separately so you can have the textured PEI, glossy or hologram finish, if you have that type of build plate.
• Requires gluing and
• Optional Sides w/ or w/o Bolts. If you do want to bolt it together, it makes it easlier to gplue. Uses 2 - M5 x 1.0 x 10mm countersunk bolts.
  You can also use 3/16" / 10-24 bolts as well. Highly suggest drilling and tapping if you want to use bolts. I've provided the sides with and without holes.
• If you want the logo on the side, I printed those separately and glued them on after. Your choice.