1.6inch BONE FPV Tricked Version: Mantis Clipper 魔改的迷你骨头机架

+++The new frame update beefs up both arms for the inverted motors - plus those through holes actually make decent drill guides now!+++ +++更新了新的机架版本，强化了倒置电机的两个机臂；通孔作为电钻的指示点也是很有帮助的✓ +++ The Mantis Clipper: A Tiny, DIY Drone You can call it the "Mantis Clipper" because it’s incredibly small and lacks a duct, making it fly around like a chaotic pair of clippers! After four or five iterations of improvements, it now performs quite well when printed slowly with PETG (though PID tuning requires extra attention). Design Highlights Propeller Layout: The left and right propellers are positioned as close to the horizontal plane as possible, and the overlapping propeller design reduces the frontal projection area, making it suitable for indoor flights. Compatibility: Supports propellers up to 42mm in size and pairs with super affordable 1104 motors (you can even find them on Taobao for just $2 each!). Electronics Support: Compatible with 25mm mounting hole AIO flight controllers and the O4 Lite air unit. The O4 Lite helmet is printed with TPU, making it lightweight and durable. Future Improvements There are still some vibration issues, but these will be fixed in upcoming updates—stay tuned! 你可以叫它螳螂推子，因为他确实很小，加上没有涵道，像一把乱飞的推子。该模型经过四五个版本的改善，用PETG缓慢打印后会有还不错的性能（只是PID调参需要额外注意）。左右浆平面尽可能的靠近水平线，同时重叠的螺旋桨缩小了正面投影面积，可以在家里试试，祝你愉快！ 支持最大42mm的螺旋桨 以及很便宜的1104电机 （在淘宝甚至一个只要两美元）； 电设支持25mm安装孔位的aio以及o4 lite 天空端，O4 lite头盔使用TPU打印 ，抖动问题接下来会更新修复，多谢多谢！