AUTODARTS - Dartboard LED Ring and Camera Mount

This is a remix of the VIPERMAN3 Autodarts LED Light Ring and Camera Mounts for use with autodarts.

Modifications I have made:-

• I have modified the ring segments to force more of the LED light towards the dartboard.
• I have added a LED Wire entry hole on to one of the camera arm LED segments
• I have created ConnectionSleeve which can be used to join each LED ring segment, this gives more strength and prevents LED light to bleed through the joins.

Camera_Housing_x3-Required

Choose one of the 3 camera housing versions below depending on your camera:-

RingLight_V1_CameraHousing_For_OTHER_OV9732.stl
RingLight_V1_CameraHousingCover_For_OTHER_OV9732.stl
RingLight_V2_CameraHousing_For_HBVCAM_OV9732.stl
RingLight_V2_CameraHousingCover_For_HBVCAM_OV9732.stl
RingLight_V3_CameraHousingCover_For_GXIVISION_OV9732.stl
RingLight_V3CameraHousing_For_GXIVISION_OV9732.stl

Ring Light

The CameraArm & CameraFoot should be printed in a sideways orientation for better strength!

RingLight_CameraFoot_40mmLongerx3-Required.stl
RingLight_CameraArm_40mmShorter_x3-Required.stl
RingLight_ConnectionPeg_x9-Required.stl (0.3mmLayerHeight, 5 perimeters)
RingLight_ConnectionSleeve_x9-Required.stl (0.3mmLayerHeight, 8 perimeters)
RingLight_LEDSegment_x6-Required.stl
RingLight_LEDSegmentForCameraArm_LEDWireEntry_x1-Required.stl
RingLight_LEDSegmentForCameraArm_x2-Required.stl