Co-Luminate '05 - 3 Inch Model for SLA printing

This model is designed for printing on a SLA printer. The scale and design are adapted to similar models of popular brands and are not exact. For precise adjustment to the desired scale, take into account the stylistically changed proportions of the model, relative to the real car. It is not recommended to reduce the scale below 1/87 and increase it more than 1/43 on a SLA printer.

The gaps between the body panels are exaggerated for comfortable printing on low quality settings and cheap resins. In some cases, adjustment is required. The design of the models tolerates aggressive shrinkage, but it is recommended to keep the body and bottom of the model assembled after printing and polymerization. Tires may fit tightly depending on the print quality and resin, so make them larger if needed. The screw holes can also be covered - use the marked hole in the structure to drill out space for the desired screws.

The Auto Rally Digital Collection is a private, non-profit project. The models and materials are created and presented out of love for the hobby, automotive design and modern 3D printing technologies. I do not accept requests or donations. Commercial use of this intellectual property is prohibited.
I sincerely hope that you will enjoy the process of assembling these models, as they were originally intended to promote auto culture and 3D printing. Thank you for your attention and have a nice day.