Funko Pop! Wall Hex Modular Display System v2

Overview

This is a newer version of my previous design.
The goal was to hide the joints between the wall hexes for a much cleaner finish.
This version requires printing the joints separately — a bit more work to set up, but the results speak for themselves.

---

Assembly Recommendations

• Print shelves ahead of time and assemble everything before mounting on the wall.
• Joint tolerances are tuned for a middle ground — they may feel slightly tight or loose depending on filament used.
• Recommended method:
  1. Insert 3 joints into one hex.
  2. Place on a flat surface (floor, desk, etc.).
  3. Press another hex into the joints.
• Once joined, nothing will feel loose.
• If you want an easier build with fewer parts, try the previous version.

---

Design Intent

These displays are inspired by other designs I’ve seen online, but I wanted:

• A sleeker look
• Less filament usage
• Stronger connections
• More modular system

---

Various Inspirations

• Funko Pop Locking Wall Shelf w/ Display (Etsy)
• Funko Pop Shelf / Display (Etsy)
• Funko Pop & Collectable Figure Shelf (Etsy)
• Thingiverse: Modular Shelf System
• Thingiverse: Funko Pop Display

---

Notable Changes

• 3 T-slot joints at each connection (instead of 2)
• Filleted edges
• Shelf has:
  • Hexagonal shape
  • Hexagonal texture for figure grip
  • Subtle lip to prevent figures from falling
• Optimized joints for faster printing and less filament but still strong

---

Specifications

• Designed for standard 4" tall Funko Pops
• Interlocks to form any desired arrangement
• Mounts via a small hole in the corner (expandable with a drill if needed)
• Prints flat on the bed — no supports needed (except for some corner variants)
• Best when used with multiple hexes — won’t hang level as a single unit

---

Corner & Shelf Variants

• NoShelf version available
• Corner transition options for 90° wall turns:
  • Corner_NoShelf – One-piece print, requires supports
  • Corner_Split_Sym_NoShelf – Two mirrored pieces, no supports, joined with L-joints. Print 2
    • Requires 1 set of L-joints
• Corner with Shelf variants:
  • Corner_Shelf – One-piece print, requires supports
  • Corner_Split_L/R_Shelf – Two mirrored pieces, no supports, joined with L-joints. Print both
    • Requires 2 sets of L-joints
    • Fits some (but not all) Funko Pops due to smaller shelf space

---

Changelog

8/13/25

• Added NoShelf hex
• Added Corner and Corner_Split versions
• Introduced L-joints for corner connections

8/14/25

• Added Corner_Shelf and Corner_Split_L/R_Shelf
• Shelf versions require 2 sets of L-joints
• Updated Edge design from previous system to match new version

8/15/25

• Added ShelfOnly
• Meant for top shelf only if there is no space for hex
• Idea inspired by this remix on Thingiverse.
• Added Shelf_2Hole

8/18/25

• Added Corner_Edge variants
• 4 different files for every different scenario
• T-joints need to be inserted while in position due to its shape
• Added Shelf_Only variants
• 3 additional files for every different scenario
• Shelf_only while in a dip needs to be installed after edges