Ultimea D60 soundbar VESA TV mount [CONFIGURABLE]

Hanging mount for soundbar using VESA standard and original hanging points of soundbar. Designed with 32" TCL tv and Ultimea Poseidon D60 soundbar, but dimensions and shape are customizable for any VESA and soundbar. Go to OnShape configurator v3.2 and insert desired configuration before downloading models. Soundbar screw slide-in hole is 1.2x of screw diameter, thus you either configure soundbar to be that much away from TV, or pre-mount soundbar first and fix mount to VESA second. Hole is always vertical.

You can use original screws to fix mount to your VESA, or if space is available, use provided Screw+Lock models to lock mount to VESA 200 holes of holder not thicker than 3mm.

Mount is to be printed twice (one instance mirrored). Wire cover was tested, but quite loose and for thicker cables may not be usable unless they are bound and shaped to match mount arm path exactly.

NOTE: Although there are "none" and "hole" stabilization methods, I have tested only "screw" one.

UPDATE 29.8.2025 (V2)

• on request added VESA 100x100 variant
• added "slide-in toggle" option
• fixed stabilization hole spacing variability based on VESA variant

UPDATE 11.7.2026 (V3)

• on request added 75x75 variant
• rearranged configuration settings to allow more combinations
• minimized extendability issues by refactoring model design steps to be based on static TV&VESA&soundbar background sketch configured dimensions
• 13.7.2026 (V3.1) fixed mount foot chamfer & locking pin grove shape
• 15.7.2026 (V3.2)
  • parameterized bigger screw size for TV holes at 200x configuration
  • fixed locking pin dimensions to be bound to mount hole size
  • parameterized soundbar screw size & bound mount width to it while slide-in is enabled (allows slide-in to stay in mount perimeter)
  • parameterized cover cavity height (may better accommodate wide or sturdy cabling)