Makita Makpac Organizer 50x50 double box

Project still in progress...

Thanks to @baua1 for insperation.

Stand equals to 50x50 box. The idea was to increase density of small parts.

I print this stand on flying bear ghost 5 with direct drive, and hot end updated to e3d v6 0.4 mm noizle with copper heat sink and bi-metal heatbreak.

I recomend to use support as tree with certain settings:

• wall line count 2
• support pattern concentric
• support density 60 %,
• support layer thickness 0.3 mm (vs 0.2 mm for model's layer thickness),
• support interface thickness 0.1 mm,
• support interface dencity 33.0 %,
• support interface pattern zig zag,