#### 3d miniature of Paris, France!
Collection of other miniatures:
[https://www.thingiverse.com/jarvis54/collections/42979328/things](https://www.thingiverse.com/jarvis54/collections/42979328/things)
I also have an updated Multi-Color version of this model (and many other exclusive miniatures) available for free on [**MakerWorld**](https://makerworld.com/en/models/1247384-paris-france-3d-miniature-v2#profileId-1269173)!
---
#### Printing & Slicing Details
This model was designed to be printed with a **0.4mm nozzle** and **0.16mm layer heights**.
Try using a **0.2mm nozzle (0.08mm layer heights)** or scaling up for even finer detail!
**Note:** If roads or smaller details disappear after slicing:
- Try lowering the extrusion/line width of external perimeters (outer walls) closer to **0.4mm**
- Use **Arachne walls**
- Can also enable the **“Detect Thin Walls”** setting
---
#### Framing Details
This model measures almost exactly **6.7in by 4.7in (170.5mm X 119.5mm)** and should fit most **5x7 frames** (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.
- Personally I use these **cheap frames from Amazon**:
[https://www.amazon.com/dp/B0C8HY7YSQ](https://www.amazon.com/dp/B0C8HY7YSQ)
- And **blue printer paper**:
[https://www.amazon.com/dp/B00006IDQT](https://www.amazon.com/dp/B00006IDQT)
I also included a **fully printable frame** (including a 1mm thick water plate) designed to fit all my miniature cities.
### A frame is not required!
This model looks great by itself and can be displayed almost anywhere.
---
#### Other Details
Model created in **Blender** using the [**Blosm addon**](https://github.com/vvoovv/blosm).
See my [**Patreon**](https://www.patreon.com/Jarvizar) for a commercial license, early downloads, & more!
[Buy me a coffee!](https://buymeacoffee.com/jarvizar)
Jarvizar
