ZPIS - Zecior Prototype Intake System | Intercooler 600x300x76 3"

https://youtu.be/yJTODLqrmbw

Disclaimer!!!
For now that's are non-printable models, I mean not tested yet, small adjustments like tolerance for printing for testing needs to be done
Feel free to edit it and adjust for your usage

Summary:
2nd part of the ZPIS serie

Contekst:
Those models can be used for:
-Simulate complete intake in CAD programs, using scan of chassis, manifolds, turbos, coolers etc, design will be adjusted for easily using Joints (as those will be components)
-Can be printed and used on car to be sure that it will fit, do not order expensive parts that you will not use
-Model prepared in this way can be assembled "outside the car" and its parts, which may be rigid, can be welded by someone for your order from stainless steel or aluminium.
Remember that part of the system must remain flexible, the body and engine work in relation to each other
(I am also planning versions with sockets for MapSensor, IaT, vacuum nipples, etc.

History:
I want to optimally build an intake system for my car using intercooler 600x300, using as less expensive, reinforced silicone elbows as possible. I decided to build a modular system of elbows and pipes that would allow me to attach the system to the car and then order the appropriate parts, or give someone such a 3D puzzle model to weld in one piece, e.g. a metal, more complicated pipe