HTC VIVE XR Elite Top Strap Holder Rev 2 Advance

###HTC VIVE XR Elite Top Strap Holder Rev 2 Advance
####What is this?
This is the tracker variant of HTC VIVE XR Elite Top Strap Holder Rev 2:
https://www.thingiverse.com/thing:6515725

####About option selection:
It provided same option selection of the normal variant.

• 30mm-Standard : For user using Quest 2 Strap Compatible System
• 30mm-FFT : For user using Quest 2 Strap Compatible System with Full Face Tracker
• 45mm-Standard : For user using original strap system
• 45mm-FFT : For user using original strap system with Full Face Tracker
  45mm series can handle most of strap, but if using Quest 2 Strap Compatible System, better get 30mm series.

####Note:
Suggested print with ABS or PETG(PLA also will work) and print it in vertical with support on plate.

To mount the tracker, user will also needs following specification screw:

• 1 x 1/4-20x5/16 screw
  User may check image 2 for reference.

####For Full Face Tracker user:
Suggested install the holder first, then install the Full Face Tracker.

####Disclaimer:
Based this holder printed by plastic, the stability depends on the strength and specialness of the plastic, therefore use it at user's own risk.

####Extra:
STEP file also provided, feel free to take it to create user's own design.