New Pot Cup / Jiffy Cup for the smaller Module

This is a very solid and stout jiffy pot / cup to just slip in the existing module. I did that so anyone who currently has this model, can print these and just pop them in.

The original module is here: https://www.printables.com/model/771009-remix-for-six-small-rockwool-cups-3cm

The original netcups are here: https://www.printables.com/model/770952-hydroponic-rockwool-netcup-flat-foldable

I made 2 versions. You can use the first or second version but I found the V1 can also be used as a tool to shape a rockwool. Check out the pictures. If you print the version 1, you can take a 1.5 or maybe a 1in rockwool and slide it through. Then take it and put it back in your V1 cup or put it in the V2 cup.

How I plan to use these, use the V1 cups to shape a rockwool, then;

1. Put the seed in and cover with Vermiculite.

2. Put the cup in a duck egg carton, as they fit perfect and I had some on hand.

3. Place the carton in an old box and cover.

4. Once they sprout, I will use a 5gal bucket tower to give low feed.

5. Then transfer to the regular jiffy pots from the small cups once the plat gets big enough, put in the regular towers.

That's my goal. I hope it helps someone else wanting to do the same and what my thought process was for these.

Let me know your thoughts or opinion if there are better ideas, etc.