Parkside Soldering station DIY

A case for a DIY mobile soldering station using the PARKSIDE X20V Team Series batteries from Lidl.

1x Soldering base controller of your choice 88x38mm big*

(No face plate provided, if yours doesn't come with one, you will have to make one for yourself. Rectangular 88x38 with 2mm rounded corners and 81.5 x 28.5mm screw holes on center. 1.4mm thickness to be flash on the front, 2mm recommended)

1x XH-M609 Low Voltage Cut Off (Optional but Highly recommended) Set to 15V cut off and 2V reset.
1x On-Off switch that can mount in 19x12mm hole
13x M3x5.7 Heated inserts (-1 insert if you don't plan on using an soldering iron holder)
12x M3x6mm DIN 965 Screws
1x M3x6mm DIN 7985 Screw (for the soldering iron holder I used that came with my base)
2x Male Spade/Blade Terminal

I used this station: https://www.aliexpress.com/item/1005006239501668.html

• examples, not guarenteed to work, haven't tested em:
  https://www.aliexpress.com/item/1005006965266353.html
  https://www.aliexpress.com/item/4000115499708.html
  https://www.aliexpress.com/item/1005006050840993.html
  T12-X2A - https://www.aliexpress.com/item/1005008925682211.html
  https://www.aliexpress.com/item/1005006600958150.html
  https://www.aliexpress.com/item/1005007566624772.html
  https://www.aliexpress.com/item/1005001947113070.html
  SET2 -https://www.aliexpress.com/item/1005005545341182.html
  https://www.aliexpress.com/item/1005007254831521.html
  https://www.aliexpress.com/item/32740527077.html
  https://www.aliexpress.com/item/1005005277665073.html

Or you can buy this one ready, but reviews claim low quality, and IMO too expensive
https://www.aliexpress.com/item/1005005460122097.html