Credit / ID Card Sleeve

Protective sleeve for a single, standard (ISO 7810 = 85.6 x 54 mm) credit or ID card.

The card is held in place by two lateral clips.

You will have to print two half-sleeves and then glue them together along the rim. I used used Revell Contacta PROFESSIONAL for glueing.

I printed it in PLA with a layer height of 0.3 mm. Make sure your slicer will produce three rim layers of 0.3 mm each (i.e. 0.9 mm total) per half-sleeve, see picture. Two 0.3 mm rim layers per half-sleeve may turn out to be too narrow, in particular with embossed credit cards, impeding insertion.

=============================================================

Update 29 May 2025:

I revised the design and added an option with the handhole at the end instead of in the middle. The end-handhole is asymmetric to the centerline in order to allow you to cover the chip (if you insert the card accordingly).

=============================================================

As always I include the OpenSCAD source file for you to adapt and/or improve:

• Download and install OpenSCAD from https://www.openscad.org
• Launch OpenSCAD and open the enclosed OpenSCAD source file (/File/Open).
• Amend the parameters at the top of the file or even amend the code.
• Save your changes (/File/Save).
• Render the design (/Design/Render).
• Export the rendered design e.g. as a .stl file (/File/Export/Export as STL).
• Slice and print.

See my other designs at
https://www.thingiverse.com/thinger13/designs