Adjustable Phone Clamp for Golf Cart

This phone holder is designed to attach to a golf cart with 26 - 32mm (1" - 1.25") frames, and adjust for a wide variety of phone sizes (60mm-95mm wide, up to 14mm thick).

The adjustment for the phone is made possible by releasing the clamp lever pressure and sliding the moving part in or out. Hold the phone and clamp together while firmly locking the lever to secure the phone in place.

The “Cart_Clamp_Small.stl” & “Clamp_Nut_Small.stl” components will fit up to 26mm (1") square frame. The “Cart_Clamp_Large.stl” & “Clamp_Nut_Large.stl" components will fit up to 32mm (1.25") frame.

July '25 Updates:

**Adaptor: For users wishing to use the 1.25" large cart clamp on a 1" frame, I have created an adaptor that fits over the clamp to facilitate a snug fit. The filename is “1in_Frame_Adaptor.stl”. Supports are required.
**Main Body - new version. I have increased the stability of the sliding body by adding several ridge lines to the opening. The filename is “Main_Body_3.stl”

Hardware required:
4 x M3 10mm machine screws
1 x M3 35mm machine screw
5 x M3 hex nuts
1 x M4 45mm machine screw
2 x M4 hex nuts
1/8" thick neoprene weather strip (or similar) https://www.amazon.com/dp/B07WNSH1VR