Foldable Stand For RC Jets / Airplanes

This is a mid hight stand for jets/airplanes that can be used on the ground or on the table. It's foldable and light, yet very strong and stable.
Lock hinges and elbows are 3D Printed from Filatech Hyper PETG filament and arms are 1/2 inch PVC pipe.

Part List:

1. 3D printed lock hinge left and right sets.
2. 3D printed elbows / bends
3. 3D printed rivet and lock for securing the nylon straps
4. 1/2" PVC pipe (O.D. 21.5 mm / I.D. 18 mm):

4 pcs of 500mm length
1 pcs of 510 mm
4 pcs of 200 mm
4 pcs of 250 mm

1. PU insulation tube for 1/2 inch pipe
2. 1.5 inch nylon strap
3. CA glue
4. You need an iron for making lock holes on nylon straps where rivets will be inserted.

Tip: Use the CA to glue all joints except the horizontal arms connecting two sides together, they are design tight-fit, leave them detachable for future replacing the soft tubes or nylon straps.

Happy printing, happy flying :)