June 13, 2025
Description
You like our work? Thank you for sending us a tip!
Minage.ca is your best crypto mining partner!
Visit us here!!! https://minage.ca/
Fan Shroud: Control Airflow According to Your Needs
Fan shrouds are designed to optimize the cooling of your equipment by directing air precisely where it is needed, whether to reduce heat or improve silence.
Why Use a Shroud?
Targeted Cooling : Channels fresh air to critical areas for optimal heat dissipation.
Noise Reduction : Allows removal of noisy original fans.
Increased Airflow : Enables manual or automatic adjustment of the air volume through your ASIC.
Custom Performance : Perfect for overclocking or customizing your equipment.
Extended ASIC Lifespan : Helps increase the durability of your ASICs.
Important Notes
We recommend printing in PETG, not in PLA.
You will need shorter M4 screws, approximately 10mm in length.
You will need fan spoofers to simulate the original fans OR aftermarket software like Braiins OS with fan bypass enabled.
We strongly advise against installing an external fan directly into the shroud; it is necessary to use at least a small piece of flexible ducting to reduce vibration in your machine and thus extend its lifespan.
Compatibility
Antminer S9
Antminer T9
Antminer L3
Whatsminer M3
Whatsminer M10
Whatsminer M20
Whatsminer M21
Whatsminer M30
Whatsminer M31
Whatsminer M32
Whatsminer M33
Whatsminer M50
Whatsminer M60
AvalonMiner 741
AvalonMiner 821
AvalonMiner 841
Innosilicon T2
Innosilicon T3
License:
Creative Commons - Attribution - Share Alike
Minage_ca
