June 14, 2025
Description
I needed to take measures to create the camera support and at the same time manUpular the panel before finishing and closing it definitively, so it helps me 2 hollow rods of M10 and 1mtr, in 27 "they are cut to 64.5cm. You only need to print in mirror that on the other side, or double it.
In another design I have the support for camera and micro support in the original location of the rear hole just below the camera, Check my links
License:
Creative Commons - Attribution - Share Alike
Xarli
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc] preview image](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/thumbs/cover/320x240/jpeg/195cfe9b-40fc-4570-b695-c540798fc979.jpeg&w=640&h=640&output=webp&q=100&n=40&default=https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg "Cable Repair and Protect for iPhone and Samsung [lightning+usbc] preview image")
