I made my own version that should be easier to print. (For my nephew so the handle is sized for small hands).
The handle is in two pieces and is assembled with two M4 screws and corresponding nuts, 16mm LG should do.
Requires a large print bed, 300mm^2.
Update: I revised the Handle Part A because the heads on my metric screws are juuuust slightly too large. The holes for the screw heads are now 8mm diameter instead of 7.5mm, the cavities for the nuts were fine so I left them as is.
Second Update: The other nephew wanted one too, so there's another blade for everyone to use.
Third Update: First nephew found handle to be slightly too short, have revised.
Check out the
Feyd Harkonnen blade I made with the same design principle.
beer2bolts
