Segmented Bowl – Inspired by IKEA PS 2014 Pendant Lamp

🌀 IKEA PS 2014-Inspired Segmented Bowl

This sculptural segmented bowl is inspired by David Wahl's iconic IKEA PS 2014 pendant lamp, reimagined as a 3D-printed centrepiece.

The bowl is composed of nine segments, arranged around a central base that holds them securely in place. Each segment is interchangeable and slots cleanly into alignment on the base with no special indexing needed.

It's a fruit bowl that is, in my opinion, too good for fruit.

---

🛠️ Assembly

• Segments slot easily into the base.
• For temporary/demo builds, a standard glue stick (e.g. Pritt Stick) works well.
• For a final assembly, use cyanoacrylate glue (super glue).
• If desired, you can pause the print of the base and pour in concrete or resin to add weight — though this is optional.

---

🎨 Finishing

• Exterior spray paint:
  Rust-Oleum Painter’s Touch Satin Spray – Heirloom White (AE0050004E8), 400 ml
  This delivers a creamy, ceramic-like finish that closely matches the lamp’s outer shell.

• Interior material:
  Printed directly using eSUN Silk PLA (Copper) filament.

• Masking:
  Standard painter’s tape was used to protect the copper interior while spraying the outer surface.

---

🧱 Print Settings

Printer: Creality Ender 3 V2 SE
Material:

• Exterior: eSUN Silk PLA White
• Interior: eSUN Silk PLA Copper
  Layer Height: 0.2 mm
  Infill: 15–20%
  Supports:
• Petals only – required for curved overhangs
• Base prints support-free
  Brim: 5 mm recommended for better adhesion

---

🏷️ Tags

ikea ps 2014, decorative bowl, segmented bowl, fusion 360, 3d printed bowl, lamp inspired, sculptural design, modular print, centerpiece, ikea remix

⚠️ Disclaimer
This design is an independent artistic interpretation inspired by the form and colour palette of the IKEA PS 2014 pendant lamp. It is not affiliated with, endorsed by, or connected to IKEA in any official capacity.

“IKEA” and “PS 2014” are trademarks of Inter IKEA Systems B.V. All references are made purely for descriptive and comparative purposes.

This project is shared for non-commercial, educational, and personal use only.