June 30, 2025
Description
This case has been designed to replcae the lid of the GMKTec G3 Plus (Intel N150) to give active airflow to the NVME and RAM.
Numerous variations/combos available:
8015 Grill version pictured.
There's no easy access to a 12V supply (other than tapping the power cable) so I opted for a USB 5V→12V USB PWM controller so that a standard 4-pin fan could be used. A direct 5V USB fan would also be a good option if you can source one.
There's a couple notches at the back to feed the cable out. Paint a vertical seam line near one to avoid a seam forming on the front.
Uses the existing clips on the G3 to attach. Only the fan needs screws to mount.
No supports!
I've also made a height extension stand to give the CPU fan intake better access to air: https://www.thingiverse.com/thing:7072178
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
mintonette
