3 Crystal Clay Stamps

3 crystal shaped stamps for clay.

You can adjust the size to a degree. If you make it smaller the details will be harder to stamp into the clay without it getting stuck though. I would recommend adjusting the height back up if you do scale it down so you have enough to hold onto. Use cornstarch or thin plastic to keep the clay from sticking.

Print is pretty simple with PLA .2 layer height gives a good enough result. I use these for stoneware clay and usually put cornstarch on the clay and the stamp. Or you can soak a thin piece of foam in wd40 and press the stamp into that first. Helps a lot Let me know how it works for you!