Decathlon foldable chair fix

After 8 years on the sun my favorite Quechua chairs have fabric fully degraded.
As the frame is still in a good condition, I decided to fix it with TPU patches.

You will need

• 25 "basic" patches (with two connectors and two holes),
• 6 "side" patches (with one connector and three holes),
• 4 "middle bot" patches for the bottom line (with one connector and two holes),
• 1 " side bot" patch for the bottom corner (without connectors and three holes)
• 14 "stripes v0.1" to connecting patches to the frame on the side
• 5 "stripes v0" to connect patches on top (they are longer than stripes v0.1)

Print from TPU or similar flexible robust plastic (PLA might be not suitable because of the melting on the sun).

To connect I used "chicago book screws" with 2mm gap: https://www.amazon.de/-/en/dp/B01BU2S2W4
You can use 3 mm or 4 mm screws, but some plastic bearings might be needed to have a tight attachment.