SRC AK74/SR74/AK74U Nozzle + Valve GAK08 Replacement Part

You can't buy repiably a Nozzle for this old beauty.
That's why I made my own.
Needs a bit of sanding and adjustments but will fit inside the gun.
Use a 8mm Bit for the Nozzle Inside where spring and Valve is placed.
Use a very soft spring ranging from 8-6.5mm. I used a very soft tention spring from a hardware kit and stretched it for the very soft spring.
Strong filament like ABS is recommended but it will work for a few cicles with other materials. The better the layer strengh the better the results.
The Nail pin inside should be a 2mm x 16mm sized one. Don't glue it it it needs to be friction fit.

I did a few changes to the original design to have it be more fdm friendly as well as more dureable.